Telnet - ZyXEL Communications P-873HNUP-51B Support Notes
Hide thumbs
Also See for P-873HNUP-51B:
- User manual (339 pages) ,
- User manual (360 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Telnet
Telnet is also a common way to configure the device, but we have to use CI
commands which may not be quick-to-learn. The list of the commonly used CI
commands is provided at the end of this document.
b. Login the P-873HNUP-51B via Telnet.
1.
Set up your PC/NB IP address to be a DHCP client.
2.
Connect to a LAN port of P-873HNUP-51B via RJ45 Ethernet cable and open
your Hyper Terminal software (capable of using TELNET).
3.
The default IP of P-873HNUP-51B is 192.168.1.1 username/password =
admin/1234.
4.
Type the command line "atsh" to display the basic information of device.
All contents copyright (c) 2011 ZyXEL Communications Corporation.
P-873HNUP-51B Support Notes
Advertisement
Table of Contents
