Dmz Host Configuration - ZyXEL Communications P-873HNUP-51B Support Notes
Hide thumbs
Also See for P-873HNUP-51B:
- User manual (339 pages) ,
- User manual (360 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
DMZ Host Configuration
If we enable the DMZ host, it will open up all the internal ports to the dedicated
Server IP (in this case, IP = 192.168.1.35) allowing client at the WAN side to access
the FTP server via port forwarding.
a. Create a DMZ host.
1.
Go to Network Settings > NAT > DMZ.
2.
Enter the IP of the Default Server Address, e.g. "192.168.1.35".
3.
Click Apply.
Use the notebook to access the FTP server with IP = 111.251.185.173
All contents copyright (c) 2011 ZyXEL Communications Corporation.
P-873HNUP-51B Support Notes
Advertisement
Table of Contents
