Table of Contents
Advertisement
Client PC Description
Client PC IP address
Service Name
Protocol
Port Range
Add
IP filtering entries will be listed in the IP filtering table shown below.
Delete Selected /
Delete All
Enter a description for reference/identification of
up to 16 alphanumeric characters.
Enter a starting IP address in the left field and the
end IP address in the right field to define a range
of IP addresses; or enter an IP address in the left
field only to define a single IP address.
Various services are listed here with a short
description. Check/uncheck the box for each
service you wish to select.
Select protocol "TCP" or "UDP" or "Both" for a
service not included in the "Client PC Service" list.
Enter the port range for the service not included
in the "Client PC Service" list.
Enter a single port number e.g. 110, a range of
port numbers e.g. 110-120, or multiple port
numbers separated by a comma e.g. 110,115,120.
Click "Add" to add selected services or a user
defined service to the IP filtering table.
Delete selected or all entries from the table.
87
Advertisement
Table of Contents
