Table of Contents
Advertisement
Static IP Address
Subnet Mask
Default Gateway
Address
MAC Address
DNS Address
DNS 1,2 & 3
DNS Proxy
DNS Proxy Rules
(URL)
User ID
Password
L2TP Gateway
Connection ID
MTU
Connection Type
Idle Time Out
a computer, press "Clone Mac" to automatically enter
your computer's MAC address.
Input the IP address assigned by your ISP here.
Input the subnet mask assigned by your ISP here.
Input the default gateway assigned by your ISP here.
Some ISPs may call this "Default Route".
If your ISP filters access by MAC addresses, enter your
computer's MAC address here. Click "Clone MAC" to
automatically enter your computer's MAC address.
Select "Obtain an IP address automatically" or "Use the
following IP address". Check with your ISP if you are
unsure.
Enter the DNS address(es) assigned by your ISP here.
Enable or disable a DNS proxy server.
When DNS proxy is enabled, enter the URL of a DNS
proxy server.
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Input the L2TP gateway assigned by your ISP here.
Specify a reference name/ID for the connection.
Enter the maximum transmission unit (MTU) value of
your network connection. The default value is 1392.
Specify a connection type:
1. "Continuous": Connected all the time.
2. "Connect on Demand": Connect when you initiate
an Internet connection.
3. "Manual": Connect/disconnect manually using the
"Connect" and "Disconnect" buttons.
Specify the amount of time the router waits before
shutting down an idle connection. Only available when
"Connect on Demand" (above) is selected.
60
Advertisement
Table of Contents
