Ricoh MP C306 series Operating Instructions Manual page 21

• The WSD port can be used under Windows Vista/7/8/8.1, or Windows Server 2008/2008
R2/2012/2012 R2.
• You can connect to the printer only if both the printer and computer are on the same network
segment, or "Network discovery" is enabled. For details, see Windows Help.
Windows Vista, Windows Server 2008
1. On the [Start] menu, click [Network].
2. Right-click the machine's icon, and then click [Install].
3. Click [Locate and install driver software (recommended)].
4. Click [Browse my computer for driver software (advanced)].
5. Click [Browse...], and then specify the location of the INF file.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• PCL 5c
32-bit driver D:\X86\DRIVERS\PCL5C\X86\(Language)\DISK1
64-bit driver D:\X64\DRIVERS\PCL5C\X64\(Language)\DISK1
• PCL 6
32-bit driver D:\X86\DRIVERS\PCL6\X86\MUI\DISK1
64-bit driver D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
• PostScript 3
32-bit driver D:\X86\DRIVERS\PS\X86\MUI\DISK1
64-bit driver D:\X64\DRIVERS\PS\X64\MUI\DISK1
For details about the languages supported in the printer drivers, see page 6 "Supported
languages".
6. Click [Next].
7. Click [Close].
If installation is successful, the icon of the printer connected to the WSD port will appear in the
window for configuring printers.
• The port name that follows "WSD" uses random character strings. It cannot be changed freely.
• To stop the installation, click [Cancel] before the installation is complete. When re-installing the
WSD Port, right-click the printer's icon in the [Network] window, and then click [Uninstall].
Windows 7, Windows Server 2008 R2
1. On the [Start] menu, click [Computer].
Installing the Printer Driver for a Network Connection
19