Table of Contents
Advertisement
2. PC Configuration
User needs to configure TCP/IP network settings, Internet access configuration and
Wireless configuration for each system within Wireless Router's LAN network.
By default, Wireless Router acts as a DHCP server for server version of Windows, it
automatically assigns IP address to each system when systems boot up. For all non-server
version of Windows, the default TCP/IP setting acts as a DHCP client. If user chooses fixed IP
addresses for client systems, the Gateway of the client system must be set to the IP address
of the Wireless Router and DNS of the client system should be set to the address provided by
your ISP.
2.1 TCP/IP Networking Setup
Checking TCP/IP Settings for Windows 9x/Me
a)
Select "Start
Control Panel
Network", the window below will appear,
10
Advertisement
Table of Contents
