Advantek Networks AWR-MIMO-54RA User Manual page 42

Destination LAN IP: The network address of destination LAN.
Subnet Mask: The subnet mask of destination LAN.
Gateway: The next stop gateway of the path toward the destination LAN. This is the IP of the
neighbor router that this router should communicate with on the path to the destination LAN.
Dynamic Routing
Dynamic Routing can be used to cache routes learned by routing protocols, thus
allowing the automation of static routing maintenance. The router, using the RIP (Routing
Information Protocol) protocol, determines the network packet's route based on the fewest
number of hops between the source and the destination. In this case, you could automatically
adjust to physical changes in the network layout.
Working Mode: Select whether the wireless broadband router acts like router or gateway.
Listen Mode: Enable this mode to allow RIP server to receive routing information and
updating the routing information.
Supply Mode: Enable this mode to allow RIP server to send out routing information and
updating the routing information.
42