Advantek Networks AWR-MIMO-54RA User Manual page 16

• If you decide to use IP address from Wireless Router, select "Obtain an IP
address automatically".
• If you decide to use the IP address you are desired, select "Use the following
IP address". Make sure enter correct addresses in "IP Address" and "Subnet
Mask" fields.
• You must set Wireless Router's IP address as "Default Gateway".
• If the DNS Server fields are empty, select "Use the following DNS server
addresses" and enter the DNS address is provided by your ISP, then click
"OK".
Checking TCP/IP Settings for Windows XP
a) Click "Start", select "Control Panel
Area Connection" then select "Properties". The window shown as below will appear.
b) Select "Internet Protocol (TCP/IP)" then click "Properties", window shown as below
will appear.
Network Connection" and right click "Local
16