Table of Contents
Advertisement
Ans:
Check the following.
a) If your PC is set to Infrastructure Mode, because the router is always in
Infrastructure Mode.
b) If the SSID on your PC and wireless router are the same. Remember that the
SSID is case-sensitive.
c) If both of your PC and wireless router have the same WEP settings. The default
setting for the wireless router is disabled, so your wireless station should also
have WEP disabled.
d) If WEP is enabled on the wireless router, your PC must have WEP enabled, and
the key tables (64/128 bit encryption) must match.
e) If the wireless router's wireless screen is set to allow LAN access to select
wireless stations only, then each of your wireless stations must have been
selected or access will be blocked.
f)
To see if radio interference is causing a problem, check if connection is possible
when close to the wireless router. Remember that the transmission range can
be as short as 100 feet in poor environment.
Q5)
Wireless connection speed is very slow.
Ans:
A wireless system transmission speed depends on the distance and the environment.
To obtain the highest possible connection speed, you can try the followings:
a)
Try to adjust wireless router location and orientation.
b)
If there are interference problems, change to another wireless channel.
c)
If other devices cause the interference, you should turn off that device or
relocate it.
Q6)
The "Status" light is ON (steady Green) after power on, it means the router is hung
Ans:
Please disconnect the power adapter from the power jack on the router and reconnect
the power adapter again to the router, check if the "Status" light is flashing normally.
If you have any troubles to configure or setup this WLAN adapter, please feel free to
contact us.
Before contacting us, make sure collect following information. Submit complete detailed
information of your problem will help us to provide you accurate answers.
Model Name:
Serial Number:
PC Settings:
Other:
58
Advertisement
Table of Contents
