Display Assembly - HP Compaq Presario CQ62 Maintenance And Service Manual

Display assembly

Description
39.6-cm (15.6-in) High Definition (HD), light-emitting diode (LED) display assembly for use in:
●
Biscotti computer models
●
HP G62 silver computer models
●
HP G62 white computer models
●
HP G62 matte black computer models
●
HP G62 red computer models
● HP G62 blue computer models
Before removing the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
on page
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the display assembly:
1. Turn the computer display-side up, with the front toward you.
2. Open the display as far as possible.
3. Disconnect the display panel cable (1) and the microphone cable (2) from the system board and
remove it from its routing channel.
4. Pull the antenna cables through the opening in the top cover (3) and disengage the cables from
the clip in the routing channel leading to the display hinge (4).
Battery on page
47).
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
41).
42)
45)
52)
55)
Component replacement procedures
Spare part number
605906-001
605907-001
605908-001
608444-001
615423-001
615424-001
WLAN module
67