HP Compaq Presario CQ62 Maintenance And Service Manual page 76

Table of Contents

Advertisement

5.
Disconnect the webcam cable (5) from the system board and release it from the clips that attach
it to the system board.
CAUTION:
steps. Failure to support the display assembly can result in damage to the assembly and other
components.
6.
Remove the six black Phillips PM2.5×7.0 screws (1) that secure the display assembly to the
computer.
7.
Lift the display panel (2) straight up to remove it.
Reverse this procedure to install the display assembly.
68
Chapter 4 Removal and replacement procedures
Support the display assembly when removing the display screws in the following

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G62

Table of Contents