Dodge 2014 CHARGER User Manual page 72

ELECTRONICS
Making A Phone Call
• Press the Uconnect® Phone button
• After the BEEP, say "dial" then the number (or "call" then the name as listed in your phone;
see Phonebook).
NOTE:
You can also initiate a call by using the touchscreen on the Phone main screen.
Receiving A Call — Accept (And End)
• When an incoming call rings/is announced on Uconnect®, press the Phone button
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, touch the "mute" soft-key on the Phone main screen to mute and unmute
the call.
Transfer Ongoing Call Between Handset And Vehicle
• During an on-going call, touch the "Transfer" soft-key on the Phone main screen to
transfer an on-going call between handset and vehicle.
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212"
• "Call Emergency"
• "Call Towing Assistance"
• "Redial"
Phonebook
• Uconnect® radios will automatically download your phonebook from your paired phone,
if this feature is supported by your phone. Entries are updated each time that the phone
is connected. If your phone book entries do not appear, check the settings on your phone.
Some phones require you to enable this feature manually.
• Your phonebook can be browsed on your radio screen, but editing can only be done on
your phone. To browse, touch the "Phone" soft-key, then the "Phonebook" soft-key.
• Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are
shown at the top of your main phone screen.
70
.
.
.