Manual Seat Adjustments - Dodge 2014 CHARGER User Manual

GETTING STARTED
NOTE:
Before programming your RKE transmitters you must select the feature through the
Uconnect® system. Refer to "Uconnect® Settings " in "Understanding Your Instrument
Panel" in the Owner's Manual on the DVD for further details.
• To program a Key Fob to the memory position:
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Press and release the S (SET) button on the memory switch, then within five seconds
press and release the 1 or 2 button accordingly.
4. Press and release the LOCK button on the RKE transmitter within 10 seconds.
• To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the
programmed RKE transmitter.
Easy Entry/Exit Feature
• The memory seat has an Easy Entry/Exit feature. This feature provides automatic driver
seat positioning to enhance driver mobility when entering and exiting the vehicle.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. To
enable (or later disable) this feature you must select "Easy Exit Seats" in "Engine Off
Options" through the programmable features in the Uconnect® system.
• Refer to "Uconnect® Customer Programmable Features" in "Electronics" of this User
Guide.
• For further details refer to "Uconnect® Settings" in "Understanding Your Instrument
Panel" in the Owner's Manual on the DVD.

Manual Seat Adjustments

Forward/Rearward
• Lift up on the adjusting bar located at the
front of the seat near the floor and release
it when the seat is at the desired position.
Then, using body pressure, move forward
and backward on the seat to be sure that
the seat adjusters have latched.
Recliner
• Lean forward in the seat and lift the re-
cliner lever, then lean back to the desired
position and release the lever.
• Lift the lever to return the seatback to an
upright position.
24