Dodge 2014 CHARGER User Manual page 14

Includes srt
Hide thumbs Also See for 2014 CHARGER:
Table of Contents

Advertisement

GETTING STARTED
To Enter The Trunk
• With a valid Keyless Enter-N-Go™ Key Fob
located outside the vehicle and within 5 ft
(1.5 m) of the deck lid, press the button on
the right side of Center High Mounted
Stop Light (CHMSL) which is located on
the deck lid.
• Whenever the vehicle is unlocked, you
can enter the trunk by pressing the button
on the right side of the CHMSl.
NOTE:
Refer to your Owner's Manual on the DVD for
further information.
Engine Starting/Stopping
Starting
With a valid Keyless Enter-N-Go™ Key Fob
inside the vehicle:
1. Shift the transmission into PARK or NEU-
TRAL.
2. While pressing the brake pedal, press the
ENGINE START/STOP button once. If the
engine fails to start, the starter will disen-
gage automatically after 10 seconds.
3. To stop the cranking of the engine prior to
the engine starting, press the button
again.
NOTE:
In case the ignition switch does not change
with the push of a button, the RKE transmit-
ter (Key Fob) may have a low or dead battery. In this situation a back up method can be used
to operate the ignition switch. Put the nose side of the Key Fob (side opposite of the
Emergency Key) against the ENGINE START/STOP button and push to operate the ignition
switch.
12
1 — Trunk Button
1 — Engine START/STOP Button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents