Gigabyte GA-990FXA-UD5 R5 User Manual page 76

Step 3:
Make sure you have installed the Marvell RAID driver and Marvell Storage Utility from the motherboard driver
® ®
Storage Utility by clicking the MarvellTray icon on the
disk. While in the operating system, launch the Marvell
®
on the desktop or the Start\Apps screen.
Under Virtual Disk 0, the Property tab displays the
rebuild progress on the right of the Background Activity
Progress item, indicating that the RAID volume is being
rebuilt. When completed, the status will display as Done.
• Manually Rebuilding RAID 1 in the Operating System
You can manually rebuild a RAID 1 array without setting the new hard drive as a Spare drive in the RAID setup
utility first. While in the operating system, open the Marvell Storage Utility and login.
®
Step 1:
Under Virtual Disk 0, click the Operation tab and select
Rebuild.
Step 2:
The screen will display the new hard drive. Click on the
hard drive to select it and click the Submit button to
begin the rebuild.
Configuring SATA Hard Drive(s) - 76 -