Gigabyte GA-990FXA-UD5 R5 User Manual page 26

7) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors, Controlled by AMD SB950 South Bridge)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The AMD South Bridge supports
RAID 0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for
instructions on configuring a RAID array.
BUG DEBUG
RT PORT
8) GSATA3 6/7 (SATA 6Gb/s Connectors, Controlled by Marvell
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device. The Marvell
Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array.
BUG
RT
Hardware Installation
7
7
To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Peripherals\SB SATA
Configuration," for more information.
SATA3
0 2 4
1 3 5
®
chip supports RAID 0 and RAID 1.
®
7
GSATA3
6
1
7
1
7
- 26 -
Pin No. Definition
1 GND
2 TXP
1
3 TXN
1
4 GND
5 RXN
6 RXP
7 GND
88SE9172 Chip)
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND