Gigabyte GA-990FXA-UD5 R5 User Manual page 52

` Marvell SATA Controller Configuration
& GSATA Controller (Marvell
Enables or disables RAID for the SATA controllers integrated in the Marvell
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDE Mode D isables RAID for the SATA controllers and configures the SATA controllers to IDE
mode.
AHCI Mode C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
RAID Mode Enables RAID for the SATA controllers.
& GSATA Controller (Marvell
Enables or disables RAID for the SATA controllers integrated in the Marvell
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDE Mode D isables RAID for the SATA controllers and configures the SATA controllers to IDE
mode.
AHCI Mode C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
RAID Mode Enables RAID for the SATA controllers.
BIOS Setup
88SE9172 Chip, GSATA3 6 and GSATA3 7 connectors)
®
88SE9172 Chip, eSATA connectors on the back panel)
®
- 52 -
88SE9172 chip or configures
®
88SE9172 chip or configures
®