USB
South Bridge:
-
1 4 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through
the internal USB headers)
VIA
VL805 chip:
®
-
4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the
internal USB header)
* B e sure to connect your USB device(s) to the USB 2.0/1.1 ports before the USB 3.0
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
8 x SATA 6Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.0/2.0 header
3 x USB 2.0/1.1 headers
1 x serial port header
1 x Clear CMOS jumper
1 x Trusted Platform Module (TPM) header
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x optical S/PDIF Out connector
2 x USB 3.0/2.0 ports
8 x USB 2.0/1.1 ports
2 x eSATA 6Gb/s connectors
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Out, Line In, Line Out, Mic In)
I/O Controller
iTE
I/O Controller Chip
®
Hardware
System voltage detection
Monitor
CPU/System temperature detection
CPU/System/Power fan speed detection
CPU overheating warning
CPU/System/Power fan fail warning
CPU/System fan speed control
* W hether the fan speed control function is supported will depend on the cooler you
driver is installed. (Refer to the labels in section 1-7, "Back Panel Connectors.")
install.
- 11 -
Hardware Installation