Vitocom 200, Type Lan2 - Viessmann VITODENS 242-F Technical Manual

Control units
(cont.)
Specification
3 4

Vitocom 200, type LAN2

Part no.: See current pricelist
For remote monitoring, remote control and remote setup of all heating
circuits in a heating system via IP networks (LAN)
As an internet data transfer establishes a permanent connection
("always online"), access to the heating system is particularly fast.
Compact device for wall mounting
For system operation with Vitotrol app, Vitodata 100 or
Vitodata 300
Functions when operating with Vitotrol app:
■ Remote control of up to 3 heating circuits in one heating system
■ Setting of operating programs, set values and time programs
■ Scanning system information
■ Displaying messages on the Vitotrol app user interface
The Vitotrol app supports the following end devices:
■ Terminal devices with Apple iOS operating system version 6.0
■ Terminal devices with Google Android operating system Version 4.0
or higher
Note
For more information, see www.vitotrol-app.info.
Functions when operating with Vitodata 100:
For all heating circuits in a heating system:
■ Remote monitoring:
– Forwarding messages via email to terminal devices with email cli-
ent function
– Forwarding messages via SMS to mobile phone/smartphone or
fax (via chargeable internet service Vitodata 100 fault manage-
ment)
– Monitoring additional devices via the inputs and output of the
Vitocom 200
■ Remote control:
Adjusting operating programs, set values, time programs and heat-
ing curves
VITODENS
. 5
2 6
Power supply via plug-in power sup-
ply unit
Rated current
Power consumption
Safety category
IP rating
Mode of operation
Permissible ambient temperature
– Operation
– Storage and transport
On-site connection
Note
■ Telecommunication costs for data transfer are not included in the
device price.
■ For more information, see www.vitodata.info.
Functions when operating with Vitodata 300:
For all heating circuits in a heating system:
■ Remote monitoring:
– Forwarding of messages by SMS to mobile phone/smartphone, by
email to end devices with email client functionality or by fax to fax
machines
– Monitoring additional devices via the inputs and output of the
Vitocom 200
■ Remote control:
Adjusting operating programs, set values, time programs and heat-
ing curves
■ Remote setup:
– Configuring Vitocom 200 parameters
– Remote setup of Vitotronic control parameters via coding
addresses
Note
■ Alongside the data transfer telecommunication costs, usage
charges have to be taken into account for Vitodata 300.
■ For more information, see www.vitodata.info.
Configuration
■ In the case of dynamic IP addressing (DHCP), the Vitocom 200 is
configured automatically
No adjustments have to be made on the DSL router
Observe the network settings of the DSL router
■ The Vitocom 200 inputs are configured via the Vitodata 100 or
Vitodata 300 user interface
■ The Vitocom 200 is connected to the Vitotronic control unit via LON.
The Vitocom 200 does not need to be configured for the LON.
230 V~/5 V–
1.6 A
5 W
II
IP 30 to EN 60529; ensure
through design/installation
Type 1B to EN 60730-1
0 to +50 °C
Installation in living spaces or
boiler rooms (standard ambi-
ent conditions)
–20 to +85 °C
Digital input:
Floating contact
VIESMANN
103
7