Product Information; Vitodens 200-W, Type B2Hb, B2Kb - Viessmann VITODENS 200-W Installation And Service Instructions Manual

Intended use
(cont.)
Any usage beyond this must be approved by the man-
ufacturer in each individual case.

Product information

Vitodens 200-W, type B2HB, B2KB

Wall mounted gas condensing boiler with Inox-Radial
heat exchanger and the following integrated compo-
nents:
■ Modulating MatriX cylinder burner for natural gas
and LPG
Hydraulics with 3-way diverter valve and variable
■
speed high efficiency circulation pump
Vitotronic 100 for constant temperature operation
■
■ Integral diaphragm expansion vessel (10 l capacity)
Incorrect usage or operation of the appliance (e.g. the
appliance being opened by the system user) is prohibi-
ted and will result in an exclusion of liability. Incorrect
usage also occurs if the components in the heating
system are modified from their intended use (e.g. if the
flue gas and ventilation air paths are sealed).
The selected gas category in the delivered condition
and the associated nominal gas pressure are given on
the boiler type plate. The type plate also shows the
other gas types and pressures with which the boiler
can be operated. A conversion within the stated natu-
ral gas groups is not required. For conversion to LPG
(without conversion kit), see "Commissioning, inspec-
tion and maintenance".
The Vitodens 200-W may generally only be delivered
to countries listed on the type plate. For deliveries to
other countries, approved contractors must arrange
individual approval on their own initiative and in
accordance with the law of the country in question.
Information
7