Q-See QT Series User Manual page 59

Name Symbol
Add
Delete
Modify
Arrows
Track
This interface is used to program the tracking routine for the camera. Clicking on the Track
button will bring up the live view for that camera plus a control panel:
The user can control the dome's rotation direction, plus speed as well as the zoom, focus and
iris.
Start Record – The system will begin recording the sequence of movements you perform on
the PTZ control panel. Clicking this again will stop the recording.
Start Track – This will play back the tracking sequence you just recorded. Clicking on this
button again will stop the playback.
What it Does
Opens a window to allow the user to set the speed and time of a new
preset point
Deletes a preset point
Opens the settings window for the selected preset point allowing you
to change the settings
Enables the user to alter the position of a setting in the cruise order.
Move a preset point all the way to the top of the order
Move a preset point up one position in the list
Move a preset point down one position in the list
Move a preset point to the bottom of the order
PICTURE 7-8
59