Q-See QT Series User Manual page 37

Snap Tab
In this tab, you can configure how many still images are taken, the quality of the images and
the timing between them when the Snapshot button is pushed on the Control Bar.
Recycle Record Tab
This is selected by default. Recycle record allows the DVR to record over old events when
the hard drive is full. Otherwise, the DVR will stop recording when there is no more space
available.
RECORD RECORD
Enable Enable Record Bitrate Record Bitrate Time Time Stamp Stamp
Resolution Resolution
Quality Quality
Snap Time Interval [S] Snap Time Interval [S]
Snap Number Snap Number
PICTURE 4-18
Recycle Record Recycle Record Snap Snap
CIF CIF
Medium Medium
2 2
1 1
Default Default Apply Apply Exit Exit
37