Q-See QT Series User Manual page 58

Preset
Clicking a Setting button in the Preset
column will bring up another window
And, selecting Setting will bring up the
camera view along with a control panel to
program the camera's motion.
The dome's rotation can be controlled vertically, horizontally and diagonally along with its
speed. The lens zoom, focus and iris (light level) can be set as well. Select the number you
want to assign to this set of actions and click the Save button to save your preset. You can
hide the control panel by clicking on the "-" button or right-clicking on the screen. The control
panel can be unhidden by right-clicking on the screen again. The X button will exit the control
interface.
Cruise
Selecting a Setting button from the Cruise column will open the Cruise window.
Select Add or double-click on an existing line
to modify and the CRUISE PRESET window
will open.
Delete will remove a selected cruise line
Clear All will remove all of the cruise lines.
The set of icons to the right of the screen are
used to configure each cruise setting.
Preview – Preview the cruise to ensure that
you have the desired results.
58
PRESET - Channel 1 PRESET - Channel 1
No. No. Enable Enable Name Name
1 1 preset001 preset001
2 2 preset002 preset002
3 3
preset003 preset003
4 4 preset004 preset004
5 5
preset005 preset005
6 6 preset006 preset006
7 7
preset007 preset007
8 8 preset008 preset008
9 9 preset009 preset009
10 10 preset010 preset010
PICTURE 7-4
01 01 02 02 03 03 04 04
Zoom Zoom
Focus Focus
Iris Iris
Speed: 5 Speed: 5
PICTURE 7-5
PICTURE 7-6
PICTURE 7-7
Preset Preset
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
OK OK
05 05 06 06 07 07 08 08 All All
No. No.
1 1
Save Save
Exit Exit