Disa Password (Dip) - Panasonic KX-T336200 Installation Instructions Manual

tern
Assigning Items
r
Conditions
If "SLA" command is entered without index number, all physical slot numbers (except 113 and 115) will be
displayed in ascending order (from 101 to 315).
It is impossible to select Index No.1 13 and 115, because Index No.1 13 is fixed to CPU card and 115 is
fixed to T-SW card.
If Index No.1 14 is selected, assignable input value is limited to '00: none" or '18: OHCA."
T-l card should be assigned to FSOl (05 or 09 of any shelf.
One T-l card occupies three slots. If you assign a T-l card to
l
for other cards. '* * *" is displayed in these two slots and the cursor skips them.
If no CO trunk card is assigned, it is not possible to program 'CO Line
If AGC card is not assigned, =Automatic Gain Control (AGC)n cannot be programmed.
If DPH card is not assigned, "Doorphone
If ATLC card is not assigned, it is not possible to program 'Attendant Console (ATT)" and
"Attendant Queue Priority (AQP)."
If DISA card is not assigned, it is not possible to program "DISA (DIS)", 'DISA Code (DIC)
and 'DISA Password (DIP)."
If DID card is not assigned, it is not possible to program 'DID (DID)."
When assigning a card, the card status ia Out of Service (OUS). When using the card, the
card status should be set to In Service (INS).
For 'In Service (INS)" and "Out of Service
(INS)" and Section 8-F-4.00 "Out of Service
For confirming whether card status is INS or OUS, refer to Section 15-F-1.02 'Card Status
Screen."
15 : ATLC (Attendant Console Line Circuit) card
16 : DPH (Doorphone Circuit) card
17 : RMT (Remote Circuit) card
18 : OHCA (Off-Hook Call Announcement) card
1 o-c-3
Input Value
Continued
.