Table of Contents
Advertisement
Description
command provides the following assignments.
(Password level: Two or higher)
(1) DIL 1: N CO Key Only (PITS only)
It is programmable that an incoming CO call routed via "DIL 1: N" feature
arrives at "CO button only" or "CO button or PDN button" as follows.
(Parameters)
Y : An incoming CO call routed via DIL 1: N feature only arrives at a PITS
telephone which has associated CO button (SCO, GCO).
If no CO button is assigned on a PITS, an incoming CO call will not
arrive at that extension.
N : An incoming CO call routed via DIL 1: N feature arrives at CO button
(SCO, GCO) or PDN button.
If no CO button is available on a PITS, an incoming CO call will arrive at
PDN button available. (default)
(2) EXT Off-hook BLF (PITS only)
The status indicator on DSS (DNj
associated extension user under one of the following settings.
(Parameters)
Y : The status indicator on DSS (DN) button is lighted steadily either when.
the associated extension user goes off-hook, or when all PDN buttons
are busy. (default)
N : The status indicator on DSS (DN) button is lighted steadily only when all
PDN buttons on the associated extension are busy.
(3) DTMF-Tone Integration
On extensions with the Voice Mail Port parameter enabled, the KX-T336
system can send codes (DTMF tones) to indicate the state of the call (busy,
answered, ringing, disconnect, etc.) in addition to the normal call progress
tones. These codes enable the Voice Processing system to immediately
recognize the current state of the call and improve its call handling
performance.
(Parameters)
Y : The KX-T336 system sends codes (DTMF tones) to the
N : The KX-T336 system does not send codes (DTMF tones) to the VPS.
(default)
reflects the idle/busy status of the
button
10-C-81
(70695)
VPS.
Advertisement
Chapters
Table of Contents
