Panasonic KX-T336200 Installation Instructions Manual page 80

Operation
Setting Call Forwarding to Trunk
1. Lift the handset or press
the SP-PHONE button.
2 . Press the FVVDIDND button, then
dial "5."
Or, dial the feature number for
"Call Forwarding to Trunk."
Dial the feature number for
selecting the CO line and the
telephone number of the
destination and "V in succession.
You hear confirmation tone 1 or
l
2 and then dial tone 1 or 3 or 4.
If your PITS has a display, it
l
shows:
If the assigned number exceeds
the display capacity:
Replace the handset or press the
SP-PHONE
The indicator on the fWD/DND
l
button starts flashing.
(Supplement)
The system does not check the dialed number,
toll restriction level, and the feature number for
selecting a CO line when the extension user is
setting this function.
button.,
4-F-20
Canceling Call Forwarding to Trunk
1. Lift the handset or press
the SP-PHONE button.
2 . Press the FWD/DND
dial "0."
Or, dial the feature number for
"Call Forwarding/Do Not Disturb
Cancel."
You hear confirmation tone 1 or
l
2 and then dial tone 1 or 3 or 4.
If your PITS has a display, it
l
shows:
3. Replace the handset or press the
SP-PHONE button.
(Supplement)
Type SOand KX-17050 PITS telephones are not
provided with the FWD/DND
button on them can be programmed to be the
button.
Refer to Section 9-G-l .03 "Station (3/3)" and
Section 12-C-2.00 "PF Button Assignment" for
further information.
.
button, then
Cancel
button. Only the PF3