Table of Contents
Advertisement
Installing the AHCI Driver During Windows Vista Installation
The AHCI driver must be installed during the Windows
installation. This is required in order to install the operating system
onto a hard drive that is in AHCI mode.
1.
Star t Windows Setup
by booting from the
installation CD. Follow
the steps on the screen.
When the screen on
the right appears, click
Custom (advanced).
2.
Select Load Driver.
3.
Inser t
the
diskette that contains
the driver then click OK.
You can create the
driver diskette by using
the files included in the
provided CD.
floppy
Supported Software
®
4
Vista
91
Advertisement
Table of Contents
