Table of Contents
Advertisement
2
Hardware Installation
Universal Serial Bus Connectors
USB 2
USB 1
USB 4
USB 3
USB allows data exchange between your computer and a wide
range of simultaneously accessible external Plug and Play peripherals.
The system board supports 4 onboard USB 2.0/1.1 ports. The USB
5-6 and USB 7-8 connectors allow you to connect 4 additional USB
2.0/1.1 ports. The USB ports may be mounted on a card-edge
bracket. Install the card-edge bracket to an available slot at the rear
of the system chassis then insert the USB port cables to these USB
connectors.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("Onboard Device" section) of the BIOS. Refer to chapter 3 for
more information.
26
1
USB 5-6
USB 7-8
1 0
2
1
9
Advertisement
Table of Contents
