Usb Power Select - DFI-ITOX G5G100-L10C User Manual

USB Power Select

1
JP1 and JP5 are used to select the power of the USB por ts.
Selecting 5V_standby will allow you to use a USB keyboard to wake
up the system.
BIOS Setting
"USB KB Wake-Up From S3" in the Power Management Setup
submenu of the BIOS must be set to Enabled. Refer to chapter 3
for more information.
Important:
If you are using the Wake-On-USB Keyboard function for 2 USB
ports, the 5V_standby power source of your power supply
must support ≥ 1.5A. For 3 or more USB ports, the 5V_standby
power source of your power supply must support ≥ 2A.
Hardware Installation
3
USB 5-8
2
(JP5)
1
1-2 On: 5V
(default)
1 2 3
USB 1-4
(JP1)
1-2 On: 5V
(default)
2
3
2
1
2-3 On:
5V_standby
1 2 3
2-3 On:
5V_standby
17