DFI-ITOX G5G100-L10C User Manual page 60

3
BIOS Setup
Onboard Serial Port 1 to Onboard Serial Port 4
3F8, 2F8, 3E8, 2E8 Allows you to manually select an I/O address for
Disabled
Serial Port 1 Use IRQ to Serial Port 4 Use IRQ
These fields are used to select an IRQ for the onboard serial port.
PWRON After PWR-Fail
Off
On
Former-Sts
60
the serial port.
Disables the serial por t.
When power returns after an AC power failure, the
system's power is off. You must press the Power button
to power-on the system.
When power returns after an AC power failure, the
system will automatically power-on.
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system's power is off when
AC power failure occurs, it will remain off when power
returns. If the system's power is on when AC power
failure occurs, the system will power-on when power
returns.