Eastwood ARC 80 20295 Assembly & Operating Instructions
  1. Manuals
  2. Brands
  3. Eastwood Manuals
  4. Welding System
  5. ARC 80 20295
  6. Assembly & operating instructions

Eastwood ARC 80 20295 Assembly & Operating Instructions

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Item #20295
ARC 80 WELDER
ASSEMBLY & OPERATING INSTRUCTIONS

Advertisement

Table of Contents
loading

Related Manuals for Eastwood ARC 80 20295

Summary of Contents for Eastwood ARC 80 20295

  • Page 1 Item #20295 ARC 80 WELDER ASSEMBLY & OPERATING INSTRUCTIONS...

  • Page 2: Specifications

    WARRANTY REPAIR: If Eastwood confi rms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.

  • Page 3: Safety Information

    READ & UNDERSTAND ALL INSTRUCTIONS & PRECAUTIONS BEFORE PROCEEDING This unit emits a powerful high voltage and extreme heat which can cause severe burns, dismemberment, electrical shock and death. Eastwood shall not be held liable for consequences due to deliberate or unintentional misuse of this product. SAFETY INFORMATION READ INSTRUCTIONS! Thoroughly read and understand this instruction manual before using the welder.
  • Page 4 • Anyone with a pacemaker should stay away from any welding without consultant from a doctor. NOTICE! Do not touch the contact tip with the unit turned “ON”. Turn the unit “OFF” and unplug it before changing tips or cleaning the nozzle. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...

  • Page 5: Duty Cycle

    DUTY CYCLE The rated Duty Cycle refers to the amount of welding that can be done within an amount of time. The Eastwood Arc 80 has a Duty Cycle of 20% at 95 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes.

  • Page 6: Stick Welding

    • Feed the Welding Rod into the workpiece joint at a 15 angle. • Lift rod from workpiece when weld bead is completed. • Turn off Welder Power Switch. • Set the Electrode or “Stick” Holder on a safe, non-fl ammable, surface. FIG. F FIG. F Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...

  • Page 7: Troubleshooting

    It is suggested to weld toward the ground connection. Contaminated Electrode Rod Make sure that Electrodes are clean and dry before use. Contaminated Base Metal Clean base metal of any oil, debris, coatings, or moisture. To order parts and supplies: 800.345.1178 >> eastwood.com...
  • Page 8 #12762L, XL, XXL – Welding Jacket #19001 – Welding Rod 1/16" Diameter See our complete line of MIG consumables and parts at www.eastwood.com If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >>...

Table of Contents