Using The Windows Print Driver - Fuji Xerox DocuPrint CP116 w User Manual

8
If necessary, repeat steps
9
Click OK twice.
Printing on Custom Size Paper
Use the following procedures to print using either the Windows or Mac OS X print drivers.

• Using the Windows Print Driver

This section explains the procedure using Windows 7 as an example.
NOTE:
• The way to display the printer Properties/Printing Preferences dialog box differs according to the application software.
Refer to the manual of your respective application software.
1
From the application menu, select Print.
2
Select your printer and click Preferences.
3
Select the Paper/Output tab.
4
From the Paper Size, select the size you want to print on.
See also:
• "Defining Custom Paper Sizes" on page 87.
5
Click OK.
6
Click Print in the Print dialog box to start printing.
• Using the Mac OS X Print Driver
This section explains the procedure using OS X 10.9 TextEdit as an example.
1
From the File menu, select Page Setup.
2
Select the printer from Format For.
3
From Paper Size, select Manage Custom Sizes.
4
In the Custom Paper Sizes window, click +.
A newly created setting "Untitled" is displayed in the list.
5
Double-click "Untitled" and enter a name for the setting.
6
Enter the size of the original document in the Width and Height boxes of Paper Size.
7
Specify Non-Printable Area if necessary.
8
Click OK.
9
Make sure that the newly created paper size is chosen in Paper Size, and then click OK.
10
From the File menu, select Print.
11
Click Print to start printing.
88 Printing Basics
5 to 7 to define another custom size.