Windows Mobile - Q-See QC SERIES User Manual

5.5 WINDOWS MOBILE

Your QC-Series IP camera can be configured to be remotely monitered by a phone running the
Windows Mobile operating system through the use of the DMSS software included on the disk
that came with your camera or available via download from www.Q-See.com/Support
If you are downloading the software, begin with Step 1, below. Otherwise, copy the software
from the CD to your computer's desktop and begin with Step 3.
STEP 1. Download the phone software
from Q-See.com/Support by looking
up your DVR's model number and
then selecting Windows Mobile Pro
Smart Phone Software.
STEP 2. Extract the DMSS.cab file
from the archive and save it to your
desktop.
NOTE! The file you download will be a .rar formatted archive. We use this
format to compress the file to the smallest possible size to speed up your
downloading. If you need an extraction utility to open it, you can find free
software at http://rarlabs.com/download.htm (PC) or http://www.unrarx.
com (Mac)
STEP 3. Connect your phone to the
computer and transfer the software to
your phone in the usual manner.
You will be asked whether you wish
to install the software to your device
or storage card.
88
PICTURE 5-25
PICTURE 5-26
STEP 4. After the program is installed,
you can launch it from the Programs
menu.
STEP 5. Upon launch, you will be
presented with a login window. Enter
the following details:
Address: Enter the Server IP (your
public IP )
Port: 37777.
User ID: admin (by default or use
whatever user ID that you set in the
camera)
Password: admin (by default or
whatever password you set in the
camera)
STEP 7. Once you've logged in, select
your camera by double-clicking on
its name or by clicking on it once and
then selecting the Video button. You
will now be in the Video Monitor
interface.
Camera - Go back to the camera
selection window.
PTZ - Not functional with this camera.
Full - Switch to full-screen display (no
controls). You can also click on the
video itself, or use the maximize icon
in the upper right of the screen.
Video - Go to Video Monitor Interface.
To exit DMSS, click the X at the top right corner of the screen.
PICTURE 5-27
PICTURE 5-28
PICTURE 5-29
89