Q-See QC SERIES User Manual page 39

OPERATION
Once you have selected the device you wish to monitor, you are able to view the live feed
from your camera. You may capture still images from the video by pushing the Snapshot
button. These images will be found in your device's Photos menu.
The Main menu gives you access to all of the functions of QC View. Touching the device's
Return button - whether on screen, or on a keypad - while in one window will return you back
to this menu.
Initially, you will need to turn on your camera's
display individually from the Device List. You
can bring up the device list by tapping on its
icon on the righ of the screen, or by double-
tapping in an empty video display. Even
though the application will show multiple
channels available, there is only one channel
from the camera. A green surround around
your camera's video shows that this is the
"active" channel and any actions performed
using the buttons on the left of the screen will
affect that channel.
Real-time Monitor: This window is where you will view the feed from your camera.
PICTURE 5-6
76
PICTURE 5-5
Audio (requires audio-
enabled camera)
Snapshot (saves to
Local Files)
Favorites (groups of
channels)
Close Channel
Device list
PTZ Controls
Playback: This is not available when monitoring a camera.
Event List: When you set up Push Config (below) to notify you of events such as motion
detection, camera masking (video blind) or a local alarm triggered at the DVR itself, QC View
will keep a log of these events which can be reviewed in this list.
Channel Config: You are able to adjust
the configuration of each video channel to
optimize the performance on your iPad or
iPhone. These settings will not change those
set on your DVR, but instead allow you to
compensate for being in areas where with
poor connectivity, for example.
Push Config: This window provides you
a check list allowing you to indicate which
cameras will alert you based on motion
detection, camera masking, or a local alarm
triggered at the DVR itself. When Push is
activated, you will receive alerts on your
mobile device even when you're not currently
in the program. You can click on an alert and
it will take you directly to video playback of
the incident that triggered the alert.
Favorites: This is not applicable for the
camera as it only has a single channel.
Local Config: This is not applicable to your
camera.
Help: Opens the internal help documentation.
NOTE! If you like this application, please leave positive feedback in the App
Store.
PICTURE 5-7
PICTURE 5-8
77