Pride Mobility Legend XL Owner's Manual page 31

V I I .
POWER SEAT (OPTIONAL)
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the seat
automatically with minimal effort on the part of the operator.
Operating your power seat:
1. Ensure your scooter is level and stationary.
2. Toggle “on” the power seat switch that is located on the tiller console.
3. To raise the power seat, place your hands on the handgrips and use your thumb to push the right side of the
throttle control lever.
4. Release the lever when you have attained your desired height.
5. To lower the power seat, place your hands on the handgrips and use your thumb to push the left side of the
throttle control lever.
6. Release the lever when you have attained your desired height.
7. Ensure your seat is in the lowest position and toggle “off” the power seat switch before you attempt to drive
your scooter again.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
n
Do not attempt to raise or lower the seat while in motion!
n
Operate the power seat only on level ground.
n
Do not operate your scooter with the power seat elevated.
n
It is recommended that the scooter be driven only with the seat in the lowest position.
Legend XL/Rev A/April 2003
C O M F O R T A D J U S T M E N T S
www.pridemobility.com
31