Pride Mobility Legend XL Owner's Manual page 19

TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, throttle
control levers, battery condition meter, lights switch, hazard lights switch, turn indicator buttons, status LED, and
horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
KEY SWITCH
STATUS LED
LIGHTS SWITCH
HORN BUTTON
6.5-13 KM/H SWITCH
(CLASS 3 ONLY)
TURN INDICATOR BUTTON
THROTTLE CONTROL LEVER
Figure 5.Tiller Console
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see V. “Batteries and Charging.”
Turn Indicator Buttons
n Press the appropriate turn indicator button once to activate it.
n Your scooter’s turn indicators are timed to shut off automatically.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
n Toggle the switch forward to turn on the flashers.
n Toggle the switch rearward to turn off the flashers.
Horn Button
Your scooter must be turned on for the horn to be operational.
n This button activates a warning horn.
n Do not hesitate to use the warning horn when doing so may prevent accident or injury.
6.5-13 km/h (4-8 mph) Switch (Class 3 Only)
n Toggle the switch forward and your scooter’s maximum speed is 13 km/h.
n Toggle the switch rearward and your scooter’s maximum speed is 6.5 km/h.
Legend XL/Rev A/April 2003
I V . Y O U R S C O O T E R
www.pridemobility.com
BATTERY CONDITION METER
SPEED ADJUSTMENT DIAL
POWER SEAT SWITCH (OPTIONAL)
HAZARD LIGHTS SWITCH
HORN BUTTON
TURN INDICATOR BUTTON
THROTTLE CONTROL LEVER
19