External Server Authentication; Using Active Directory - Konica Minolta Bizhub C252 User Manual

Network scanner
Hide thumbs Also See for Bizhub C252:
Table of Contents

Advertisement

Specifying Settings From the Control Panel
3.35

External Server Authentication

If performing user authentication using an external server, multiple settings
are required depending on the type of server being used. Specify the settings
by using the following procedure as reference.
You can specify the external server authentication settings according to the
network environment that is to be used.
Item
Active Directory
NTLM v1 or NTLM v2
NDS
Note
In the future, the operating system may be updated or a new operating
system may be released. For details, refer to the manual of the operating
system.

Using Active Directory

Before specifying the settings, prepare the information described below.
Administrator password (required)
MFP IP address (required)
Subnet mask (required)
Default gateway
Priority DNS server address (required)
Substitute 1 DNS server address
Substitute 2 DNS server address
DNS default domain name
DNS host name
Active Directory default domain name (required)
NTP server (Time Adjustment Setting) address
List of the users for authentication (required)
C252
Description (reference)
Specify when using Windows 2000 Server, 2003 Server.
Specify when using Windows NT 4.0 Server. NTLM v2 is
available from Windows NT 4.0 (Service Pack 4).
Specify when using NetWare 5.1 or NetWare 6.0.
3
3-139

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub c450

Table of Contents