14
WHEELS, TIRES
14.4
Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
(RC 125)
–
Remove screw
–
Remove nut
–
Holding the rear wheel, withdraw wheel spindle
adjuster.
–
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
–
Pull the rear wheel back and take it out of the swingarm.
L02150-11
and pull wheel speed sensor
and the washer. Remove chain adjuster
Warning
Danger of accidents Reduced braking effect caused by damaged brake
discs.
–
Always lay the wheel down in such a way that the brake discs are not
damaged.
Info
Do not operate the foot brake when the rear wheel is removed.
out of the hole.
.
with the washer and chain
121