Removing The Battery Cover - KTM RC 125 EU 2015 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.14

Removing the battery cover

–
Push the chain up in the area behind the chain guide.
–
Check the chain sliding guard for wear.
» If the chain sliding guard has lost material due to wear to the extent that, in

area
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
L02167-10
Preparatory work
–
Remove the front rider's seat. (

, the drilled hole of screw
p. 81)
is visible from above:
92