Maytag MED5100DC Installation Instructions Manual page 22

3.
Remove inner door from outer door
Position the door with the inside of the door facing up.
Using a Phillips screwdriver, remove the 10 screws securing
the inner door to the outer door. Lift off the inner door and
set aside.
4.
Remove hinge and latch
Using a T25 screwdriver, remove the 3 TORX
®
securing the latch plate and latch backing plate and the
5 screws holding the hinge assembly in place.
22
Latch
Hinge
screws
®
5.
Reinstall hinge and latch on
opposite sides
Using a T25 screwdriver, reinstall the latch plate and latch
®
backing plate with the 3 TORX
the hinge assembly with the 5 screws on the opposite sides
from which they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
screws removed earlier and
®
Bottom
of door