Table of Contents
Advertisement
9.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
10.
Reinstall door on dryer
Using a T25
screwdriver, remove the 4 screws on the dryer.
®
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the 4 T25
screws removed earlier.
Reverse door swing round-shaped door – double handle
1.
Bottom
of door
IMPORTANT: If the protective film has not yet been removed
from the dryer, peel the film from the dryer door before
proceeding.
Using a T25
door hinge to the dryer and lift up and out to remove the door.
Place the door on a soft towel or other non-scratch surface.
Reinstall the 4 screws in the holes.
2.
Using a T25
®
the door strike to the door frame of the dryer. Rotate the strike
180° and attach to the opposite side of dryer door frame,
as shown.
Remove door from dryer
screwdriver, remove the 4 screws securing the
®
Move the door strike
screwdriver, remove the 2 screws securing
®
21
Advertisement
Table of Contents
