Power; No Power At All; System Does Not Run On Battery Power - Tronic PMG Quadpad User Manual

PMG Quadpad Instructions Manual

Power

*

No power at all

1. Verify the power status indicator.
2. Check all power connections, and remove any power strips and surge
protectors to connect the AC adapter directly to the AC power outlet.
3. Inspect the AC adapter.
Check for any physical damage, and ensure the power cable is firmly
attached to the adapter brick and the system.
4. Verify the AC power source is working by attaching another device to the
outlet.
5. Remove the system from any docking station or port replicator.
6. Remove all devices and then test for system power with minimal
devices attached.
* Disconnect the AC adapter.
* Remove the battery pack.
* Remove any externally or internally installed options and other
devices.
* Wait for 30 seconds before reconnecting the devices and power
sources.
*

System does not run on battery power

1. Verify the power and battery status indicator.
2. Remove and reseat the battery to make sure it is properly connected.
3. Swap batteries with another similar system, if available.
If another similar system is available, then verify that the battery pack
works in the other system and that the other system battery pack works in
this system.
58