Enabling The Irda Function; To Connect An Infrared Device - Tronic PMG Quadpad User Manual

PMG Quadpad Instructions Manual

Enabling the IrDA Function

1. Reboot the PMG Quadpad and enter the BIOS Utility Setup.
2. Enable the IR from the Peripherals menu in the Systems BIOS utility. The
default is Enable.
3. The IrDA IRQ and the IrDA DMA default settings are 5.
4. Save changes and exit the Systems BIOS Utility.

To connect an infrared device

The infrared port, a small, semi-circular lens located on the front of the PMG
Quadpad provides wireless, serial communication between the PMG
Quadpad and other infrared devices such as printers or other computers.
Using the infrared port
1. Make sure the infrared ports of the PMG Quadpad and the other
device lie in a straight line. The two ports should be no more than 1
meter apart, with no obstructions in between. Noise from nearby
equipment can cause transmission errors.
2. Open Wireless Link to check the status of communications in Control
Panel.
Printing to an infrared printer
Install your printer and assign it to the PMG Quadpad infrared port. Users
can then print from the applications as you would to any other printers.
Transferring files through an infrared connection
Users can use the PMG Quadpad infrared port to transfer files by using
wireless link. See the Windows online help for instructions on using
Wireless Link.
28