Before Using Your Pmg Quadpad; Installation Guidelines - Tronic PMG Quadpad User Manual

Installation Guidelines

Read the following before assembling or disassembling the PMG Quadpad:
1. Follow all warnings and instructions marked on the product and within the
Manual.
2. Before you begin cleaning the PMG Quadpad, make sure that you have
unplugged all power cords and the device is Powered Off. Use a damp
cloth for cleaning. Do not use liquids of any kind or aerosol cleaners.
3. Never place the PMG Quadpad on an unstable surface; it may fall, causing
serious damage to it.
4. Avoid using a telephone (other than a cordless type) with your PMG
Quadpad during an electrical storm. There may be remote risk of electric
shock from lightning.
5. To ensure optimum performance and to protect your PMG Quadpad from
overheating, ventilation slots must not be covered or obstructed in any way.
The PMG Quadpad should never be placed near a radiator, heat register or
in a built-in cabinet unless adequate ventilation is provided.
6. The PMG Quadpad should only be operated using the specified power
indicated on the Warning Label located on the battery. If you are unsure of
the type of power available to your locale, consult a dealer or the local
power company.
7. If using an extension cord with the PMG Quadpad, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also note that the total rating of
all the devices plugged into the circuit does not exceed the fuse rating.
8. Never force objects of any kind into the PMG Quadpad's ventilation or
housing slots as they may contact dangerous voltage points or spark
resulting in electrical shock or a fire. Keep all liquids of any kind away from
the PMG Quadpad.
9. Always disconnect all telephone lines & all power cords from the wall outlet
before servicing or disassembling this product. Refer to the dealer or a
qualified technician under the following conditions:

Before Using Your PMG Quadpad

3