Tronic PMG Quadpad User Manual page 25

Left Side View of the PMG Quadpad
11. Power Switch:
Powers the PMG Quadpad ON and OFF. Press and hold for 4 seconds to
initiate Power OFF.
12. USB 2.0 Ports:
13. USB 2.0 Ports:
Permits hot plugging of USB peripheral devices to the PMG Quadpad.
The USB ports support most USB mouse and keyboard devices.
14. DC-in Jack:
Plug the DC (Direct Current) end of the AC Adapter into this jack for
external power and battery recharging. Before plugging in the power cord,
you must first verify that the external power voltage is appropriate for your
geographical area.
15. VGA-Out Port:
Connects an external (VGA) display monitor to the PMG Quadpad.
16. Stylus Pen:
A stylus pen is used to activate the touch screen display and functions in
the same way as an external mouse. The stylus pen is partially visible
from the left side of the PMG Quadpad and can be located by pulling it
from its secure housing. Only use the tip of the stylus pen when
interacting with the LCD display to prevent damage to the display surface.
CHAPTER 2 – System Overview
17