JVC KW-V11E Service Manual page 5

Digital tuner (DAB) section (For KW-V215DBT)
Frequency Range
Sensitivity
Signal to Noise Ratio
DAB Aerial Connector
FM tuner section
Frequency Range (50 kHz)
Usable Sensitivity (S/N: 30 dB Dev 22.5 kHz)
Quieting Sensitivity (S/N: 46 dB Dev 22.5 kHz)
Frequency Response (± 3.0 dB)
Signal to Noise Ratio
Selectivity (± 400 kHz)
Stereo Separation
LW tuner section
Frequency Range (9 kHz)
Usable Sensitivity
MW tuner section
Frequency Range (9 kHz)
Usable Sensitivity
Video section
Color System of External Video Input
External Video Input Level (RCA/mini jack)
Video Output Level (RCA jack)
Analog RGB input (Only for EU ver.)
Audio section
Maximum Power (Front & Rear)
Full Bandwidth Power (Front & Rear)
(at less than 1% THD))
Preout Level
Preout Impedance
Speaker Impedance
Parametric Equalizer (5 Band)
General
Operating Voltage
Maximum Current Consumption
Installation Dimensions (W × H × D)
Operational Temperature Range
Weight (Main Unit)
• Design and specifications are subject to change without notice.
L-BAND: 1 452.960 MHz - 1 490.624 MHz
BAND III: 174.928 MHz - 239.200 MHz
-100 dBm
90 Db
Connector type: SMB
Output Voltage: 14.4 V (11 V - 16 V allowable)
Maximum Current: <100 mA
87.5 MHz to 108.0 MHz
6.2 dBf (0.56 µV/75 Ω)
15.2 dBf (1.58 µV/75 Ω)
30 Hz - 15 kHz
68 dB (MONO)
≥ 80 dB
40 dB (1 kHz)
153 kHz to 279 kHz
45 µV
531 kHz - 1 611 kHz
28.5 µV
NTSC/PAL
1 Vp-p/ 75 Ω
1 Vp-p/ 75 Ω
0.7 Vp-p/75 Ω
50 W × 4
30 W × 4 (E Ver.)
22 W × 4 (EU Ver.)
4 V/10 k Ω
≤ 600 Ω
4 Ω - 8 Ω
Bass: 63 Hz, 80 Hz, 100 Hz, 125 Hz, ±10 dB
Mid Bass: 200 Hz, 250 Hz, 315 Hz, 400 Hz, ±10 dB
Mid: 0.63 kHz, 0.8 kHz, 1.0 kHz, 1.25 kHz, ±10 dB
Mid High: 2.0 kHz, 2.5 kHz, 3.15 kHz, 4.0 kHz, ±10 dB
High: 6.3 kHz, 8.0 kHz, 10.0 kHz, 12.5 kHz, ±10 dB
14.4 V (10.5 V - 16 V allowable)
10 A
182 mm × 111 mm × 160 mm (E Ver.)
178 mm × 100 mm × 162 mm (EU Ver.)
-10°C - +60°C
1.9 kg (E Ver.)
1.6 kg (EU Ver.)
(No.MA601<Rev.001>)5/30