JVC KW-V11E Service Manual page 18

Service Mode Page2
[NEXT] key: Switch from Page 1 → Page 2.
[PREV] key: Switch from Page 2 → Page 1.
[EXIT] key: Exit the Service Mode and return to the normal
screen.
Text
SYS *.*** **** Display of system controller version and JVM
number
APP *.*.*** Display of APP u-controller + design data
version
DATA **** Display of Font data version
DISC **** Display of DISC mecha module version
Macro **** Display of Macrovision version
DivX **** Display of DviX version
BT **** Display of BT module Firmware version
Span * Display of Span selection status for Tuner
(displayed as NA or SA or EU or ASIA or BR
or TN or JP)
Type Destination information
Model Model Information
DISC-Area DISC mecha module destination information
Region Region code
S.NO Serial number
DATA1 **** Display of opening data's version
(Commercially="1000", DOP="DOP")
DATA2 **** Display of wallpaper data's version
(Commercially: "1000", DOP: "DOP")
DATA3 **** Display of steering remote control threshold
version
Displays the version number when threshold
data is written using USB.
For DOP models, display as follows as the
fixed value is retained from the beginning.
Commercially support model: "0001"
Commercially non support model: "-"
HONDA: "KC"
MAZDA: "KF"
MITSUBISHI: "KG"
ISUZU: "KJ
NISSAN1: "KS1"
NISSAN2 "KS2"
TOYOTA: "KL"
Description
(No.MA601<Rev.001>)18/30
Text
DATA4 **** Display of DEMO image version
(Commercially="1000")
DAB ****/******** Display of DAB module version
HDR ******** Display of HD-Radio module version
4.2.2.1 INITIALIZE ALL
Process (1) to (4) in sequence.
(1) Initialization of system controller EEPROM
Backup memory, user profiles 1 to 3
Tuner Area setting
Error history
(2) Initialization of DISC module EEPROM (Initialize to normal)
Send [Arg0: 9C, Arg1: 06, Arg2: 00] (initialize EEPROM to
normal) to DISC module
Receive [Arg0: AA Arg1: 01] from DISC module
Receive [Arg0: AA Arg1: 09 Arg2: ** Arg3: **] from DISC
module
(3) Initialization of Bluetooth module EEPROM
Note:
Before performing Initialize All, turn off BT pairing mode
and voice-recognition mode. Failure to do so will result in
error during initialization.
(4) Initialization of user-captured wallpaper area
Clear the APP u-controller F.ROM user-capture area and
reset to the initial state (all black).
Data not cleared
• Monitor adjustment data (panel Flash ROM)
• Touch panel adjustment data / Tuner adjustment data / Tun-
er span information / serial no. (Syscom EEPROM)
• No. of power-on counts (Syscom EEPROM)
• No. of eject counts (DISC mecha EEPROM)
<While executing INITIALIZE>
<When INITIALIZE completed normally>
Below screen is retained and normal screen is not displayed.
• [BACK] / [EXIT] keys prohibited
• All keys including hard keys and remote controller keys are
prohibited.
Description