JVC KW-V11E Service Manual page 20

4.2.2.4 DVD CHECK MODE
When this mode is selected, reset DISC module and restart in
Check Mode. (Specify "Check Mode On" in the startup mode for
0x94 command.)
After restarting in Check Mode, transit to DVD CHECK MODE
screen.
Directly touch the item to select the operation.
NORMAL PLAY: Displays the currently selected item
XXXX XXXX: Displays the data acquired from the mecha module
(4 bytes) as it is.
• Immediately after moving to the DVD CHECK MODE, hide the
display of all the above. Display the top 2 lines after an item is
selected.
• DVD CHECK MODE is cleared by power OFF (Clear by ACC
OFF/ BATTERY OFF/Detach).
(1) NORMAL PLAY
Process test item [1] of the check mode specification
2nd line display: NORMAL PLAY
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
(2) EF OUT-TRACKING OFF
Process test item [2] of the check mode specification
2nd line display: EF OUT-TRACKING OFF
3rd line display: Nil
(3) EF IN-TRACKING OFF
Process test item [3] of the check mode specification
2nd line display: EF IN-TRACKING OFF
3rd line display: Nil
(4) CD-LASER ON
Process test item [4] of the check mode specification
2nd line display: CD-LASER ON
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
(5) DVD-LASER ON
Process test item [5] of the check mode specification
2nd line display: DVD-LASER ON
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
X X X X
Arg4 Arg5
X X X X
Arg4 Arg5
X X X X
Arg4 Arg5
(No.MA601<Rev.001>)20/30
(6) DVDx1 JITTER MODE
Process test item [6] of the check mode specification
2nd line display: DVDx1 JITTER MODE
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
(7) SEARCH & JITTER
Process test item [10] of the check mode specification
2nd line display: SEARCH & JITTER
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
(8) MONITOR
Process test item [11] of the check mode specification
2nd line display: MONITOR
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
(9) DVDx1 PLAY
Process test item [12] of the check mode specification
2nd line display: DVDx1 PLAY
3rd line display: Display Arg 2,3,4,5 (HEX) of the command
received from the module, in the following format.
X X X X
Arg2 Arg3
(10) STOP
Process test item [13] of the check mode specification
2nd line display: STOP
3rd line display: Nil
(11) EJECT
Process test item [14] of the check mode specification
2nd line display: EJECT
3rd line display: Nil
(12) LOAD
Process test item [15] of the check mode specification
2nd line display: LOAD
3rd line display: Nil
(13) SLEEP
Process test item [16] of the check mode specification
2nd line display: SLEEP
3rd line display: Nil
X X X X
Arg4 Arg5
X X X X
Arg4 Arg5
X X X X
Arg4 Arg5
X X X X
Arg4 Arg5