JVC KW-V11E Service Manual page 23

4.3 SS mode
4.3.1 Switching to SS mode
Press and hold the [EQ] key and [DISP] key (1), and press the
[RESET] key (2).
(2)
4.3.2 Clearing the SS mode
Performing one of the following operations cancels the produc-
tion mode and restores the normal mode.
• Power off by battery (backup) OFF
• Reset
4.3.3 Display specifications
SS Mode Page1
SS Mode Page2 <DAB MODEL>
SS Mode Page2 <Except DAB MODEL>
SS Mode Page3
(1)
[NEXT] key: Switch from Page 1 → Page 2.
(1)
[PREV] key: Switch from Page 2 → Page 1.
[EXIT] key: Exit the SS Mode and return to the normal screen.
When any of the above SS mode screens is displayed (Page 1/
3, 2/3, 3/3), set the audio selector to MUTE (equivalent to Stand-
by source).
Upon exiting the SS mode to return to the normal mode, restore
the audio selector to the original source.
Text
SYS x.***
APP x.y.zzz
DATA ****
DISC ****
DivX ****
BT ****
Span *
Type
Model
DISC-AREA
reg.
HDR ********
DAB ****/******** Display of DAB module version (DAB model
OK Display for All
Items Above
MON: Y or N
(No.MA601<Rev.001>)23/30
Description
Display of system controller version.
x:0(1S), 1(2S), 2(PP), 3(MP)
Display of system controller + design data
version
x:0 (release not been approved), 1 (release
approved), y: rounded up by the official re-
lease, zzz: revision number managed by the
SVN ("10" won't be expressed as "010")
* The version system of DDX and that of KW-
V are common.
Display of font data version.
Display of DISC mecha module version.
Display of DivX version.
Display of BT module firmware version.
Display of Tuner's span selection status (NA
or SA or EU or ASIA or BR or TN or JP).
Display of destination information.
Display of model information.
Display of area information of the DISC
mecha module.
Display of region code.
Display of HD-Radio module version (HDR
model only)
only)
When APP & DATA CHKSUM is executed,
check against data in USB, and display OK
or NG.
*Not displayed if it is not executed.
*Display NG in red.
Display of status of monitor adjustment by
production line.
Y: adjustment complete
N: not adjusted.
*Display NG in red.