Selecting The Sound Mode - FUNAI W4D-D4180DB Owner's Manual

E9G04ED_EN.book Page 26 Tuesday, March 27, 2007 10:27 AM
Reformatting a Disc Manually
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
If you are using a DVD-RW disc, you can format the
disc by performing "Format". You can format DVD-RW
disc for either Video mode recording or VR mode
recording.
Note
• When you reformat the disc, the contents of the disc
are erased.
• Make sure that the recording format is set to the
desired mode. (See steps 1 to 6 in "Choosing the
Recording Format of a Blank DVD-RW Disc" on
page 24.)
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [U / D],
then press [ENTER].
3
Select "Format" using [U / D], then
press [ENTER].
4
Select "Start" using [U / D], then
press [ENTER].
5
Select "Yes" using [U / D], then
press [ENTER].
e.g.) VR mode DVD-RW disc
DVD Menu
Format
Finalise
Disc Protect OFF ON
Are you sure?
Delete All Playlists
Formatting will start.
If you want to cancel formatting, select "No".
6
Formatting is complete.
Note
• It is not possible to use a disc formatted with this unit
on other DVD recorder. When you use a disc with
another DVD recorder, format a disc using that DVD
recorder.
EN
Start
Format Mode
Yes
No
26

Selecting the Sound Mode

This unit can receive bilingual broadcasts.
You can switch between modes by pressing [AUDIO]
on the remote control. Each mode is indicated on the
TV screen as follows.
• During reception of bilingual broadcasts
Mode Audio output
Main audio from both
Main
speakers
Sub audio from both
Sub
speakers
• Main audio from the left
speaker
Main / Sub
• Sub audio from the
right speaker
Setting External Input Audio
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R
When the external input audio is a bilingual
broadcast, you can choose "Stereo" or "Bilingual" to
record on a DVD.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER].
2
Select "Recording" using [U / D],
then press [ENTER].
3
Select "External Input Audio" using
[U / D], then press [ENTER].
General Setting
Playback
Display Auto Chapter
Video Recording Audio Select (1H)
Recording Auto Finalise
Clock Aspect Ratio (Video mode)
Channel Dubbing Mode
DivX Make Recording Compatible
Reset All Bilingual Recording Audio
External Input Audio
4
Select "Stereo" or "Bilingual" using
[U / D], then press [ENTER].
General Setting
Playback
Display Auto Chapter
Video Recording Audio Select (1H)
Recording Auto Finalise
External Input Audio
Clock Aspect Ratio (Video mode)
Stereo
Channel Dubbing Mode
DivX Bilingual Make Recording Compatible
Bilingual Recording Audio
Reset All
External Input Audio
5
Press [SETUP] to exit.
Display on the
TV screen
Main
Sub
Main / Sub